| ADDA
modules |
ADDA Modules for 8 channel converters 4channel D/A converter
The 4 channel D/A converter module is able to output
4 balanced analog channels at line level. The maximum
output level is adjustable between +12dB and +27 dB.
Up to two modules can be installed in the ADDA giving
at total of 8 channels. If one module is installed 6
channels are available for surround monitoring, also
counting the basic stereo output of the ADDA 2408.
Specifications:
Connectors
4 x XLR male (pin 2 hot)
Sample Rates 44.1 to 96 kHz
Dynamic range >117 dB
THD+N (A)
< -93 dBr
Max. output level +12 to +27dBu, adjustable
Output Imp. < 40 |
|
|
| |
8 channel ProTools Mix 24 compatible I/O
The 8 channel ProTools Mix 24 module
makes it possible to interface directly to a ProTools
Mix 24 system through a standard Digidesign audio interface
peripheral cable. Alternatively the module can be used
to connect to a ProTools HD system using the legacy
port of a 192 I/O interface box. When connected to a
ProTools system the module will identify itself as a
888 I/O interface.
Read the following application note
for more information on how to use the 8 channel ProTools
MIX 24 I/O:
Specifications:
Connectors
1 x 50 pole SCSI-2 connector
Formats ProTools Mix 24
Sample Rates 44.1 or 48 kHz |
|
|
| |
|
8 channel AES3 digital I/O
The 8 channel AES3 I/O module is an
8-channel module intended for interfacing all 8 input
and output channels of the ADDA 2408 according to AES3.
The connection is made via a 25 pin female D-sub connector,
and the pinning can be set for compliancance to 3 different
pin allocation formats.
Specifications:
Connectors
1 x 25-pin female D-sub
Formats AES3
Sample Rates 44.1 to 96 kHz |
|
|
| |
8 channel TDIF digital I/O
The 8 channel TDIF I/O module makes
it possible to interface to equipment with a standard
Tascam TDIF interface. The module has full support of
the original TDIF 1 standard, the TDIF 96 extension
as well as the TDIF double speed format. The module
supports 8 channel I/O at 88.2 kHz or 96 kHz using two
TDIF cables in TDIF 1 and TDIF 96 modes or a single
cable in the TDIF DS mode.
Read the following application notes for more information
on how to connect to different types of equipment through
the TDIF I/O:
Specifications:
Connectors
2 x 25-pin female D-sub
Formats TDIF 1, TDIF 96 and TDIF DS
Sample Rates 44.1 to 96 kHz |
|
|
| |
Dual AES3-S/PDIF digital I/O The
Dual AES3-S/PDIF I/O module is a 2-channel (stereo)
module primarily intended for easy interfacing to digital
outboard equipment like DAT recorders, CD players and
digital effect boxes. The module provides both electrical
and optical S/PDIF as well as AES3 interfaces.
Specifications:
Connectors
XLR, RCA Phono, Optical
Formats AES/EBU, S/P DIF
Sample Rates 44.1 to 96 kHz |
|
|
| |
|
